In order to organize water drainage in the shower without a curb, it is important to carefully plan everything. It is necessary to perform a number of measures in order to ensure effective water drainage, prevent leaks. A curbless shower remodeling Clearwater Beach by the professionals at TampaBayFloors guarantees the best results.
Important Steps
In order to organize a drain in a shower without a sump, there are several important steps:
- You need to choose the type of drain. It can be a linear or circular drain. In the first case, the drain is used for large rooms, allows water to flow into one long gutter, which can be directed along the wall or in the center of the shower. The circular drain is installed in the center of the shower room. It is suitable for compact rooms.
- The angle of inclination plays a role. It is important to make sure that the floor of the shower is sloped to the drain by one or two percent. This will allow the water to flow in the right direction. Usually, the slope of the floor in the shower room for the drain is made towards the drain. This is how to avoid stagnant water.
- It is important to choose the right materials for the floor. It is best to use water-repellent, anti-slip materials. This can be ceramic tiles or stone tiles. They will help prevent slipping, provide ease of maintenance.
Dealing with how to organize the water drainage in the shower without a tray, it is necessary to waterproof the floor, walls of the shower. Thus it will be possible to prevent moisture on the light and provide protection from fungi, mold. It is necessary to use special waterproofing materials.
Drain in the Floor for the Shower
Relevant for many is the question of how to make a drain in the floor for the shower and here you need to perform several steps:
- Planning and design is significant. You need to determine where the shower will be installed, as well as the location of the water. It is important to make sure that the drain is in low floor level conditions.
- When preparing the foundation, you need to make sure that the bathroom floor is level and strong. If necessary, the old coating is removed, the surface is cleaned of debris.
- Waterproofing is installed. It should be transferred to the floor and the shower wall So it will be possible to prevent water leakage into other parts of the room.
A slope of the floor to the drain is created. The drain is installed. A hole is prepared. The drain is placed in it. It is important to make sure that it lies at floor level and has no gaps.
Drainage Drain for the Shower – Device
There are several important components that are included in the device of the drain trap for the shower and they help to effectively drain water, prevent unpleasant odors. Here are the main parts:
- The body of the drain is the main part of the drain. It is installed in the floor. The body can be made of plastic or metal. Its resistance to corrosion, resistance to moisture is important.
- The drain hole is located at the top of the trap. It is intended for collecting and draining water. It is important that it was wide enough to ensure a quick drainage of water.
- The siphon is the part of the drain that creates a hydraulic seal. It manages to prevent odors from the ducts from entering the room. it is filled with water and forms a barrier to gas. Different designs of siphons are possible.
Dealing with what drain to choose for a shower without a curb you need to take into account different factors to ensure effective water drainage, convenience in operation. More even water supply due to the long line provides a linear drain. Round is most often installed in the center of the shower room. It is compact, with a round grid.
